Solar Site Audit – Get a Vendor-Ready Report (India)
Thinking about rooftop solar but not sure where to start? SolSetu’s Solar Site Audit gives you a clear, vendor-ready report so you can request accurate quotes, compare proposals fairly, and move to installation with confidence—whether you’re a homeowner, housing society, SME, school, hospital, or farm
Why a Solar Site Audit first?
Quotes vary wildly when vendors don’t have consistent data. Our audit standardizes your site information so every vendor bids on the same specs, cutting back-and-forth and reducing surprises later.
With one audit you get:
- Feasibility & sizing: recommended kW capacity, panel layout, tilt & orientation
- Shading analysis: sunpath & obstruction notes (trees, parapets, water tanks)
- Yield estimate: monthly/annual kWh, plant performance assumptions
- Financials: savings projection, payback range, ROI scenarios
- Subsidy readiness: eligibility notes for PM Surya Ghar (residential) and pointers for PM-KUSUM (agri/solar pumps)
- Grid & safety: net-metering steps, basic SLD (single-line diagram) outline, protection checklist
- Vendor pack (RFP): photos, roof measurements, BoQ baseline, assumptions—so vendors can quote apples-to-apples
What’s inside the Vendor-Ready Report
- Site summary (address, DISCOM, sanctioned load, phase, meter type)
- Rooftop/ground area mapping (usable m², setbacks, access)
- System recommendation (DC/AC size, inverter topology, tentative stringing)
- Module/inverter class suggestions (Tier-1 range, not brand-locked)
- Energy model (kWh/month, PR assumptions, degradation)
- Financial model (bill offset %, tariff slab impact, payback/IRR range)
- Subsidy/approval pathway (documents checklist, timelines)
- O&M & safety (cleaning schedule, PPE, isolators, surge protection)
- Risk flags (structural notes, waterproofing, shading hotspots)
- RFP bundle (photos, measurements, baseline BoQ & SLD outline)
- Outcome: You can share one link/PDF with multiple vendors and receive
- comparable proposals faster.
Who should use it?
- Homeowners & RWAs accelerating PM Surya Ghar adoption
- SMEs & shops targeting electricity bill reduction with quick payback
- Schools/Hospitals/NGOs needing transparent procurement
- Farms & rural enterprises exploring PM-KUSUM components
How it works (simple steps)
- Book your audit on SolSetu (upload last 6–12 months electricity bills).
- Virtual pre-check (maps + photos + quick call).
- On-site/virtual measurements (as needed).
- Report delivery (PDF + shareable link) with your Vendor-Ready Pack.
- Get quotes from verified SolSetu vendors—or invite your own.
- Compare proposals fairly using our checklist; proceed to installation.
Need help shortlisting? SolSetu can route your RFP to verified installers near you.
Example (illustrative)
- Location: Indore, MP – 1,100 units/month
- Recommended system: 6 kW
- Estimated generation: ~8,500–9,000 kWh/year
- Bill offset: 65–75% (net-metered)
- Indicative payback: 4.5–6.0 years (tariff dependent)
- (Actuals vary by site, tariff, equipment class, and O&M.)
Why SolSetu
- Trusted vendor network with claimable, reviewable profiles
- Standardized RFP pack → faster, cleaner quotes
- Subsidy awareness (PM Surya Ghar / PM-KUSUM pointers)
- Bilingual guidance and post-install support options
Call-to-Action
Ready to get your Vendor-Ready Audit?
👉 Book your Solar Site Audit now at SolSetu.com .
Need a sample? Offer a demo PDF with dummy data to show the format.